Massa M3 User Manual download pdf (Page 19)

ASSA

RODUCTS

ORPORATION June 11, 2013

Product Manual 18 M3 Wireless Ultrasonic Level Sensor

4) Attach the serial null modem cable from

the gateway to the PC. If your PC does

not have a Comm Port, then you will have

to obtain a USB/RS232 Converter.

Follow the manufacturer’s instructions on

setting this up. Next, attach the Ethernet

cable between the PC and gateway.

Connect the Zigbee antenna to the

gateway. Power the gateway with

provided power supply. Obtain Digi’s

Device Discovery Software

(www.digi.com) used to find the gateway.

Once it is found, double click on the IP

address (see below) and the Digi Home

page will be displayed as seen here on the

right.

5) Enter the XBee Configuration screen by

clicking on Configuration XBee

Network. Click on either the

coordinator’s Network Address [0000] or

Extended Address [00:…] and then scroll

down and click on the Advanced Settings

menu.

6) In the Advanced Settings XBee

Configuration menu, change the

Peripheral sleep count (SN) register to

2880 and Cyclic Sleep Period (SP)

will set the gateway’s poll timeout for 24

hours.

NOTE: The poll timeout is calculated as 3 * SN

* SP * 0.01 seconds.

7) Click on the Configuration Serial Ports

menu and then click on Port 1.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 28 29

No comments

Massa M3 User Manual Page 19